? semiconductor components industries, llc, 2010 april, 2010 ? rev. 9 1 publication order number: mmsz5221bt1/d mmsz5221bt1 series preferred device zener voltage regulators 500 mw sod ? 123 surface mount three complete series of zener diodes are offered in the convenient, surface mount plastic sod ? 123 package. these devices provide a convenient alternative to the leadless 34 ? package style. features ? 500 mw rating on fr ? 4 or fr ? 5 board ? wide zener reverse voltage range ? 2.4 v to 110 v ? package designed for optimal automated board assembly ? small package size for high density applications ? general purpose, medium current ? esd rating of class 3 (>16 kv) per human body model ? pb ? free packages are available mechanical characteristics: case: void-free, transfer-molded, thermosetting plastic case finish: corrosion resistant finish, easily solderable maximum case temperature for soldering purposes: 260 c for 10 seconds polarity: cathode indicated by polarity band flammability rating: ul 94 v ? 0 maximum ratings rating symbol max unit total power dissipation on fr ? 5 board, (note 1) @ t l = 75 c derated above 75 c p d 500 6.7 mw mw/ c thermal resistance, junction ? to ? ambient (note 2) r ja 340 c/w thermal resistance, junction ? to ? lead (note 2) r jl 150 c/w junction and storage temperature range t j , t stg ? 55 to +150 c stresses exceeding maximum ratings may damage the device. maximum ratings are stress ratings only. functional operation above the recommended operating conditions is not implied. extended exposure to stresses above the recommended operating conditions may affect device reliability. 1. fr ? 5 = 3.5 x 1.5 inches, using the minimum recommended footprint. 2. thermal resistance measurement obtained via infrared scan method. device package shipping ? ordering information sod ? 123 case 425 style 1 1 cathode 2 anode mmsz52xxbt1 sod ? 123 3000/tape & reel marking diagram see specific marking information in the device marking column of the electrical characteristics table on page 3 of this data sheet. device marking information 1 2 devices listed in bold, italic are on semiconductor preferred devices. preferred devices are recommended choices for future use and best overall value. mmsz52xxbt3 sod ? 123 10000/tape & reel ?for information on tape and reel specifications, including part orientation and tape sizes, please refer to our t ape and reel packaging specifications brochure, brd8011/d. mmsz52xxbt1g sod ? 123 (pb ? free) 3000/tape & reel mmsz52xxbt3g sod ? 123 (pb ? free) 10000/tape & reel http://onsemi.com xx = device code (refer to page 3) m = date code = pb ? free package (note: microdot may be in either location) xx m 1
mmsz5221bt1 series http://onsemi.com 2 electrical characteristics (t a = 25 c unless otherwise noted, v f = 0.95 v max. @ i f = 10 ma) symbol parameter v z reverse zener voltage @ i zt i zt reverse current z zt maximum zener impedance @ i zt i zk reverse current z zk maximum zener impedance @ i zk i r reverse leakage current @ v r v r reverse voltage i f forward current v f forward voltage @ i f zener voltage regulator i f v i i r i zt v r v z v f
mmsz5221bt1 series http://onsemi.com 3 electrical characteristics (t a = 25 c unless otherwise noted, v f = 0.9 v max. @ i f = 10 ma) device device marking zener voltage (notes 3 and 4) zener impedance (note 5) leakage current v z (volts) @ i zt z zt @ i zt z zk @ i zk i r @ v r min nom max ma ma a volts mmsz5221bt1, g c1 2.28 2.4 2.52 20 30 1200 0.25 100 1 mmsz5222bt1, g c2 2.38 2.5 2.63 20 30 1250 0.25 100 1 mmsz5223bt1, g c3 2.57 2.7 2.84 20 30 1300 0.25 75 1 mmsz5224bt1, g c4 2.66 2.8 2.94 20 30 1400 0.25 75 1 mmsz5225bt1, g c5 2.85 3.0 3.15 20 29 1600 0.25 50 1 mmsz5226bt1, g d1 3.14 3.3 3.47 20 28 1600 0.25 25 1 mmsz5227bt1, g d2 3.42 3.6 3.78 20 24 1700 0.25 15 1 mmsz5228bt1, g d3 3.71 3.9 4.10 20 23 1900 0.25 10 1 mmsz5229bt1, g d4 4.09 4.3 4.52 20 22 2000 0.25 5 1 mmsz5230bt1, g d5 4.47 4.7 4.94 20 19 1900 0.25 5 2 mmsz5231bt1, g e1 4.85 5.1 5.36 20 17 1600 0.25 5 2 mmsz5232bt1, g e2 5.32 5.6 5.88 20 11 1600 0.25 5 3 mmsz5233bt1, g e3 5.70 6.0 6.30 20 7 1600 0.25 5 3.5 mmsz5234bt1, g e4 5.89 6.2 6.51 20 7 1000 0.25 5 4 mmsz5235bt1, g e5 6.46 6.8 7.14 20 5 750 0.25 3 5 mmsz5236bt1, g f1 7.13 7.5 7.88 20 6 500 0.25 3 6 mmsz5237bt1, g f2 7.79 8.2 8.61 20 8 500 0.25 3 6.5 mmsz5238bt1, g f3 8.27 8.7 9.14 20 8 600 0.25 3 6.5 mmsz5239bt1, g f4 8.65 9.1 9.56 20 10 600 0.25 3 7 mmsz5240bt1, g f5 9.50 10 10.50 20 17 600 0.25 3 8 mmsz5241bt1, g h1 10.45 11 11.55 20 22 600 0.25 2 8.4 mmsz5242bt1, g h2 11.40 12 12.60 20 30 600 0.25 1 9.1 mmsz5243bt1, g h3 12.35 13 13.65 9.5 13 600 0.25 0.5 9.9 mmsz5244bt1, g h4 13.30 14 14.70 9.0 15 600 0.25 0.1 10 mmsz5245bt1, g h5 14.25 15 15.75 8.5 16 600 0.25 0.1 11 mmsz5246bt1, g j1 15.20 16 16.80 7.8 17 600 0.25 0.1 12 mmsz5247bt1, g j2 16.15 17 17.85 7.4 19 600 0.25 0.1 13 mmsz5248bt1, g j3 17.10 18 18.90 7.0 21 600 0.25 0.1 14 mmsz5249bt1, g j4 18.05 19 19.95 6.6 23 600 0.25 0.1 14 mmsz5250bt1, g j5 19.00 20 21.00 6.2 25 600 0.25 0.1 15 mmsz5251bt1, g k1 20.90 22 23.10 5.6 29 600 0.25 0.1 17 mmsz5252bt1, g k2 22.80 24 25.20 5.2 33 600 0.25 0.1 18 mmsz5253bt1, g k3 23.75 25 26.25 5.0 35 600 0.25 0.1 19 mmsz5254bt1, g k4 25.65 27 28.35 4.6 41 600 0.25 0.1 21 mmsz5255bt1, g k5 26.60 28 29.40 4.5 44 600 0.25 0.1 21 mmsz5256bt1, g m1 28.50 30 31.50 4.2 49 600 0.25 0.1 23 mmsz5257bt1, g m2 31.35 33 34.65 3.8 58 700 0.25 0.1 25 mmsz5258bt1, g m3 34.20 36 37.80 3.4 70 700 0.25 0.1 27 mmsz5259bt1, g m4 37.05 39 40.95 3.2 80 800 0.25 0.1 30 mmsz5260bt1, g m5 40.85 43 45.15 3.0 93 900 0.25 0.1 33 mmsz5261bt1, g n1 44.65 47 49.35 2.7 105 1000 0.25 0.1 36 mmsz5262bt1, g n2 48.45 51 53.55 2.5 125 1100 0.25 0.1 39 mmsz5263bt1, g n3 53.20 56 58.80 2.2 150 1300 0.25 0.1 43 mmsz5264bt1, g n4 57.00 60 63.00 2.1 170 1400 0.25 0.1 46 mmsz5265bt1, g n5 58.90 62 65.10 2.0 185 1400 0.25 0.1 47 mmsz5266bt1, g p1 64.60 68 71.40 1.8 230 1600 0.25 0.1 52 mmsz5267bt1, g p2 71.25 75 78.75 1.7 270 1700 0.25 0.1 56 mmsz5268bt1, g p3 77.90 82 86.10 1.5 330 2000 0.25 0.1 62 mmsz5269bt1 p4 82.65 87 91.35 1.4 370 2200 0.25 0.1 68 mmsz5270bt1, g p5 86.45 91 95.55 1.4 400 2300 0.25 0.1 69 mmsz5272bt1, g r2 104.5 110 115.5 1.1 750 3000 0.25 0.1 84 3. the type numbers shown have a standard tolerance of 5% on the nominal zener voltage. 4. nominal zener voltage is measured with the device junction in thermal equilibrium at t l = 30 c 1 c. 5. z zt and z zk are measured by dividing the ac voltage drop across the device by the ac current applied. the specified limits are for i z(ac) = 0.1 i z(dc) with the ac frequency = 1 khz. *the ?g?? suffix indicates pb ? free package available.
mmsz5221bt1 series http://onsemi.com 4 typical characteristics v z , nominal zener voltage (v) ? 3 ? 2 ? 1 0 1 2 3 4 5 6 7 8 12 11 10 9 8 7 6 5 4 3 2 figure 1. temperature coefficients (temperature range ? 55 c to +150 c) typical t c values for mmsz5221bt1 series v z @ i zt 1000 10 1 10 200 v z , nominal zener voltage (v) figure 2. temperature coefficients (temperature range ? 55 c to +150 c) 1.2 1.0 0.8 0.6 0.4 0.2 0 150 125 100 75 50 25 0 t, temperature ( c) figure 3. steady state power derating p d versus t a p d versus t l 0.1 pw, pulse width (ms) figure 4. maximum nonrepetitive surge power 1 10 100 1000 1000 100 10 1 rectangular waveform, t a = 25 c 100 v z , nominal zener voltage figure 5. effect of zener voltage on zener impedance 10 1 1000 100 10 1 t j = 25 c i z(ac) = 0.1 i z(dc) f = 1 khz i z = 1 ma 5 ma 20 ma v f , forward voltage (v) figure 6. typical forward voltage 1.2 1.1 1.0 0.9 0.8 0.7 0.6 0.5 0.4 1000 100 10 1 75 v (mmsz5267bt1) 91 v (mmsz5270bt1) 150 c 75 c 25 c 0 c vz , temperature coefficient (mv/ c) vz , temperature coefficient (mv/ c) p pk , peak surge power (watts) z zt , dynamic impedance ( ) i f , forward current (ma) 100 100 typical t c values for mmsz5221bt1 series v z @ i zt
mmsz5221bt1 series http://onsemi.com 5 typical characteristics c, capacitance (pf) 100 v z , nominal zener voltage (v) figure 7. typical capacitance 1000 100 10 1 10 1 bias at 50% of v z nom t a = 25 c 0 v bias 1 v bias 12 v z , zener voltage (v) 100 10 1 0.1 0.01 10 8 6 4 2 0 t a = 25 c v z , zener voltage (v) 100 10 1 0.1 0.01 10 30 50 70 90 t a = 25 c 90 v z , nominal zener voltage (v) figure 8. typical leakage current 1000 100 10 1 0.1 0.01 0.001 0.0001 0.00001 80 70 60 50 40 30 20 10 0 +150 c +25 c ? 55 c figure 9. zener voltage versus zener current (v z up to 12 v) figure 10. zener voltage versus zener current (12 v to 91 v) i r , leakage current ( a) i z , zener current (ma) i z , zener current (ma)
mmsz5221bt1 series http://onsemi.com 6 package dimensions sod ? 123 case 425 ? 04 issue g notes: 1. dimensioning and tolerancing per ansi y14.5m, 1982. 2. controlling dimension: inch. aaaa aaaa aaaa e b d a l c 1 2 a1 dim min nom max millimeters inches a 0.94 1.17 1.35 0.037 a1 0.00 0.05 0.10 0.000 b 0.51 0.61 0.71 0.020 c 1.60 0.15 0.055 d 1.40 1.80 e 2.54 2.69 2.84 0.100 --- 3.68 0.140 l 0.25 3.86 0.010 h e 0.046 0.002 0.024 0.063 0.106 0.145 0.053 0.004 0.028 0.071 0.112 0.152 min nom max 3.56 h e --- --- --- 0.006 --- --- --- --- *for additional information on our pb ? free strategy and soldering details, please download the on semiconductor soldering and mounting techniques reference manual, solderrm/d. soldering footprint* 1.22 0.048 mm inches scale 10:1 --- --- 00 10 10 style 1: pin 1. cathode 2. anode on semiconductor and are registered trademarks of semiconductor components industries, llc (scillc). scillc reserves the right to mak e changes without further notice to any products herein. scillc makes no warranty, representation or guarantee regarding the suitability of its products for an y particular purpose, nor does scillc assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including wi thout limitation special, consequential or incidental damages. ?typical? parameters which may be provided in scillc data sheets and/or specifications can and do vary in different application s and actual performance may vary over time. all operating parameters, including ?typicals? must be validated for each customer application by customer?s technical experts. scillc does not convey any license under its patent rights nor the rights of others. scillc products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the scillc product could create a sit uation where personal injury or death may occur. should buyer purchase or use scillc products for any such unintended or unauthorized application, buyer shall indemnify and hold scillc and its of ficers, employees, subsidiaries, af filiates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, direct ly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that scillc was negligent regarding the design or manufacture of the part. scillc is an equal opportunity/affirmative action employer. this literature is subject to all applicable copyright laws and is not for resale in any manner. publication ordering information n. american technical support : 800 ? 282 ? 9855 toll free usa/canada europe, middle east and africa technical support: phone: 421 33 790 2910 japan customer focus center phone: 81 ? 3 ? 5773 ? 3850 mmsz5221bt1/d literature fulfillment : literature distribution center for on semiconductor p.o. box 5163, denver, colorado 80217 usa phone : 303 ? 675 ? 2175 or 800 ? 344 ? 3860 toll free usa/canada fax : 303 ? 675 ? 2176 or 800 ? 344 ? 3867 toll free usa/canada email : orderlit@onsemi.com on semiconductor website : www.onsemi.com order literature : http://www.onsemi.com/orderlit for additional information, please contact your local sales representative
|
